Stage Designs

Throwback: Moves Like Stagger

Joey Riggins from Lighthouse Church in Panama City Beach, FL brings us this very modern look with sleek lines. (Originally posted May 2013.)

To accomplish the design, he used 24 sheets of Coroplast and 5 rolls of screen door mesh. He started by measuring the width of the stage and dividing that by the number of Coroplast vertical columns he wanted – subtracting 21/2 feet for each row of mesh. That gave him the size of longest Coroplast pieces. He did the smaller pieces at 4 feet.

Joey then stacked 9 sheets of coro together and used a jig saw to rip the sheets down to size. (Note that the heat from the jig saw melted the Coroplast together a bit and the pieces had really rough edges. They also are not the straightest cuts but look flawless from the ground).

After all the parts were cut, he used a laser lever to shoot a line up the wall and began placing the pieces. The smaller peices were eye balled. He used a scrap piece of Coro cut to the correct height to space all the strips evenly as he went up the wall. The pieces were attached to 2×4’s on the back wall using a trim nailer. 2 foot pieces of screen door mesh were used in between for texture.

Lastly, he cut out some larger squares to hang on some diagonal walls that sit at the corner of their stage over the stair wells. It helped make the stage look wider. The set took 2 days start to finish and the cost was about $420.00. It was lit using 30 LED par cans.

noid-IMG_4820

noid-IMG_4826

noid-IMG_4829

noid-IMG_4832

noid-IMG_4834

noid-IMG_4835

Grinchish Me, I Want a Hula Hoop

13 responses to “Throwback: Moves Like Stagger”

  1. Andy Krieger says:

    Silly question… Do you guys wrinkle the mesh before you hang it or after it’s up?

    • Dan Burd says:

      Looks Great. I like the screen columns.

    • Joey Riggins says:

      Andy, We do it before while it’s on the ground. After that we hung it with staples and then trimmed the excess at the bottom. We also stapled the bottom to give it a nice finished look.

  2. Elliot says:

    Does the mesh look good up close as it does at a distant?

    • Joey Riggins says:

      Yes! Even within ten feet if its lit properly, its hard to tell exact what it is. This stuff is really cheap. I would recommend stoping by lowes and grabbing a test roll.

  3. Mike Smith says:

    Is the coroplast white?

  4. Jose says:

    Is the mesh called bright aluminum window screen?

  5. Jacob Kesling says:

    where is a good site to purchase coroplast for cheap?

  6. Damon Andrews says:

    What make/model of LED par cans are you using?

  7. Griffin Deffner says:

    A little off topic, but how do you guys like your video screens? They appear to be hanging in the air, how did you guys accomplish that?

Leave a Reply to Jacob Kesling Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.