Anthony Cofield from Raize Student Ministry in Alexandria, AL brings us this LIFE logo in a curved panel.
This was their take on the Curved Panels design. Materials were three 4’x8′ pieces of paneling at approx. $13 each and 6 10′ pieces of 1″ PVC and 12 PVC elbows. Total cost was about $100.
They drilled a 3″ diameter hole 6″ from the edges in corner of the paneling to insert the cross pieces in to. Then they used a 6′ cross piece and 3′ side piece to hole the panel’s curved shape.
They went with a white wood grain panel to reflect more colored light as well.
They change the main element in the middle depending on the message series. They make those out of 1″ foam sheeting. Approx. $15.
Neat project! you’ve done a lot within a small space – looks great! I love the re-use factor
How is the foam board attached to the pvc pipe?