Tower-Power

Tower Power

Richard Carr from Copperfield Church in Houston, Texas brings us this bundle of brightness.

To create the design they used 1×2’s to frame out the 4×8 sheets of coroplast. They cut strips of black coroplast and used a staple gun to attach it to the frame of white coroplast. The two middle frames were 4×12…the side ones 4×9. The frames were at a 40 degree angle and were held by nail gun and a cross 1X2 brace.

The entire coroplast set was on 16” riser with white coroplast in the front. They lit the riser with LED bars.

Editor’s note: You can always add great interest with your stage by simply adding levels. Lifting up the drums, keyboard player, or choir will add another element of interest to your stage.

One response to Tower Power

  1. Hi, did you light up the coroplast from the front or back? Thanks

Leave a Reply

Text formatting is available via select HTML.

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong> 

*