Design Elements

Shatterboxes

Steven Hall from Northland Church in Longwood, Florida brings us these light boxes that would work great for smaller, portable churches and larger churches too! (originally posted June 2012)

They made these light boxes for Easter.

They started each of their set pieces with a 2″x4″ frame that was 4 foot by 8 foot. They cut black Coroplast into varying widths–1 inch to 2.5 inches wide. They attached those strips to both sides of the frames – criss-crossing them to give a random look. Once those were done they added a sheet of white Coroplast to the back. Then they finished the front off with 1″x4″ trim.

They used MR16 striplights and colorblasts to light them.

They also rented some Molten Lava fabric from Dazian Fabric that hung behind the crosses and on the sides. The crosses were built for them by a Daniel Parks at Model Works. The were made of MDF.

Lastly they used 3 DL-3s to project onto 3 Kabuki’s they hung between each service. They opened the service with the story of Mary looking for Jesus when he rose.

[tentblogger-vimeo 39946449]

[tentblogger-vimeo 40233547]

The entire set cost them under $500 to build.

Check out Steven’s step-by-step tutorial on the set and lighting here.

Refraction Faction Above and Below

9 responses to “Shatterboxes”

  1. Fernie says:

    So many of these designs are awesome, is there software out there in which you can create different set designs and lighting designs???

  2. Hi Ernie, yes there’s a software for set design and lighting. Its a freeware which you can download from Google. Its called Google Sketchup. It renders 2D and 3D layouts of your design. I use the PRO version of it.

  3. Hues N Cues says:

    Google sketckup pro is very good

  4. Christina Roberts says:

    Thanks for this inspiring design. We are creating some of our own boxes for Easter including a large hexagonal lit box that our drummer will be perched on!

  5. Roger says:

    How did you light these boxes, would any LED light behind them shining through the Coroplast work?

  6. Keith says:

    I would love to see the lighting positions and how they used them. FYI The price definitely does not include the lights.

  7. kutts says:

    Hi..We need lighting design for our church is there anybody there to help us Thank You in Advance

  8. OpenCeilings says:

    Wow, this looks very pretty. Thanks for the photos of how it was done. Do you know something about ceiling panels that are used for lighting? This is a new and interesting type of lighting and decor.

Leave a Reply to Roger Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.