James Felver and Micah Jacobsen from Church of the Resurrection in Leawood, Kansas brings us this PVC pipe stage design. (originally posted August 2016)
They used around 1000 feet of PVC pipe. Uplights were Blizzards and Colorado Tours. Each pipe needed a few coats of flat white spray paint. They used stage tieline to suspend the pipes from each other.
Love how that looks. Is that 2″ PVC?
2″ PVC and 1 1/2″ PVC! Thanks!
How many pieces did you buy of each?
What did you use to tie the PVC pipes together?
We used Tie Line. It’s commonly used by production folks to secure cables to box truss or safely rig. We tucked the knot inside the pipe and were able to untie and make height adjustments if necessary. We purchased a 3000 ft spool similar to the one in the link below.
http://www.rosebrand.com/shop/product.aspx?id=506
Awesome! Thanks so much for your details. Such a great idea that looks pretty slick as well!
If it’s written here somewhere, I can’t find it. How much was all the PVC piping?
Hi Bob, It was about 7-800 or so
What kind/brand of paint did you use and did you do any prep to the pvc? I know PVC is almost impossible to get paint to stick to.
What kind/brand of paint did you use and did you do any prep to the pvc? I know PVC is almost impossible to get paint to stick to.
Hi Ryan. All of the PVC I bought from home depot had writing down the side so I had to cover it. I wiped each pipe with some shop towels. I also covered each piece of PVC with at least one quick coat of Flat White so the would not be as reflective. The Paint had no problem sticking, it was also sitting out in the Sun at about 95 degrees, so it didn’t take long to dry. Sorry for taking so long to get back to you, I forgot to select “notify me of follow up comment” (My first time using the site!) thanks – Micah
What was the purpose of painting the PVC? Its already white? I assume it has something to do with how the light responds to the PVC.
That and the writing and stripe from the mfg on it.
Hi Craig! I had to cover up the black lettering that’s printed down each pipe. I wiped it first with shop towels to clean them and prep them. Thanks! – Micah
Hey, Micah. Looks great! Was there a system that you used in how far apart your rows were?
That looks amazing!
Love this! We want to do this on our ceiling. How did you hang them?
TY – we used stage tieline
I suggest a 3-4″ screw
What do you use and how to light up the pipes?
We use Chauvet Color Strip lights. They aren’t very expensive and worked great! You can buy them at Guitarcenter.com
Dewey these are Coloroda Tours
Hello,
I am from a portable church in California. From your knowledge of the weight of this, if we used a frame, what kind of material would you recommend?
Hi, loved the design and how it brightens the stage!
Just wanted to ask, you suspended spray painted PVC pipes using Tie Line, and then placed an LED light just below them to make them light up? Please reply asap, thanks!
Hi! Micah here: yes, that’s exactly what we did. We Used flat white spray paint because we didn’t want the PVC too glossy and reflective, also to cover up and imperfections and lettering! We made the know inside the pipe, to hide excess string in case we needed to raise and lower each pipe. Apologies on the delay replying
Vamos fazer isso em um auditorio em nossa igreja no Brasil
amei é muito facil e creio que ficara lindo!
Could someone please tell me how many inches between each pipe?
Probably about a foot? Something like that – sorry for the delay in the response – this website doesn’t alert me
What is the length between the pipes?
How did you connect the tie line to the ceiling ?
We are looking at doing the same thing but were amazed at the cost. So, you have 1 foot between pipes ? What do you think the effect would be if we ripped pipes in half with a table saw, and then hung them ?
Thanks for the how-to !
The other idea we had was to not cut and stagger but wrap them in gaffe or electrical tape to give the illusion of blank space…
Also, considering lighting from behind with LED Tape…
What length did you cut the PVC down to? I’m guessing you bought 10 foot sticks.
How did you light the pipes?
Hello! I am Brazilian, I live in the city of Governador Valadares, Minas Gerais. I would like to know if there is a led light inside the pipes and what type of rope you used to hang the pipes. And how did you hang them from the top, what kind of material did you use to get them stuck in the ceiling. And the panel you used hanging in the center of the stage, what kind of material you used. Another thing, to use different colors the pipes used what kind of light?
Please how much is the price of it, and where can i get it
Please, can I get someone to help with this? Trying to do something like this for my church
Hello Micah. Am from Nigeria. I must say this is great. Pls can you share a video that explains this? Or you can share with us your the link to your YouTube channel, if there’s. I would be glad to watch.
Thanks.
hey! this is AMAZING! Im currently trying to put this together for my church. Our main concern is unwanted movement of the pipes. Is there any movement from the air conditioning or passer-bys? Anything else I/we should know going into this build?
I’m assuming this is the old sanctuary? Is the one in the Easte building or the “temporary one” in the building built in 2003?
Thanks
Hi! Great design. Working on putting together something similar. How far apart were the columns from one another? I know it has been a while since you put this up, and it is probably different now. But if you remembered the spacing, that would be awesome.
Hi! I am a worship pastor at a church looking to incorporate a new stage design! I was curious how much this whole project cost. Thank you!