Garrett Walker from Bayside Community Church in Bradenton, FL takes We’ll Have a Ball one step further with this treatment.
Garrett cut the letters out of MDF and covered the front surface with AC ducting/aluminum tape. He bought 4″ diamond plate tape rolls. The tape really helped reflect the lights off the letters.
He used ordinary lighting sockets and 14 gauge wiring to wire it all together. Garrett got the normal, 60W lightbulbs that you can find anywhere.
He used paint thinner on a rag to quickly wash the wattage print off–to give the bulbs a cleaner look. Then he used a separate dimming circuit for every letter so he could light each up independently from the other.
Budget was around $400.
[tentblogger-youtube PDMvPopwc8w]
This set is beautiful. Nice job. The video really shows off what the pit balls look like when you light them from top and bottom. Keep up the great work and don’t be surprised if I borrow a few elements.
Thanks for the Encouragement! And please feel free to Borrow! That’s what we did! There’s nothing new under the sun!
I checked out the link associated with your name. Great video and great Cover!
Very nice job! Love seeing the light bulbs spelling beautiful flash and then come down. Well done!
Here’s a video of the Stage Piece in action!
http://m.youtube.com/index?desktop_uri=%2F&gl=US#/watch?v=tuYlAKTcvig
Love it! Well done!
What kind of balls did you use to hang behind the “beautiful” light element? Great work! It looks awesome!
Check out this post for all the info on this stage design:
https://churchstagedesignideas.com/2012/01/24/well-have-a-ball/
Can you take a picture from behind the word. I’d like to see how it looks so clean!
Sure. Send me your email and I’ll send it your way. garrett@baysidecommunity.org
This reminds me of a scaled down version of the Hillsong UNITED stage from their ‘United We Stand’ album. Great effect, love it!
Thanks Tim! Yah, I’ve seen this idea a bunch of times! We felt left out, so we went ahead and did it!
Also creates a new way of building DIY Jarags without the massive energy consumption! :D
How did you cut the letters out… what kind of tools would I need to cut that out?
Sorry for the late reply. We just used a skill saw. It cuts through MDF like Butta!
Great job on the set! Just one question what type of light sockets did you use? We’re trying to do the same type of stage design and can’t find the right light sockets. Any help would be appreciated
Thanks for the encouragement!
I found the light sockets online. I forget what web site. But they are white porcelain sockets. They are mounted with 2 screws, they have 2 simple contact screws for your wiring, and a porcelain piece screws onto the socket part to conceal the wiring. It’s actually not the cheapest rout to go. There are plastic ones at Lowes that are much cheaper, but then you just have to paint them. Hope this helps.
Hey,
Can you tell us where you bought the white balls?