Steve Adams from First Assembly of God in Gainesville, FL brings us this nice mixture of squares and pallet pieces.
They built two 4×8 pallets with black cloth behind them. They used four LED light bars to light them from the bottom.
They also made 8 foot trusses out of 3/4 inch PVC and 1/2 inch PVC. Steve used a LED slim par can inside the truss to warm it.
The materials for the pallets and PVC trusses cost $110.
Great design!!
how did you make the truss from pvc pipes? How did you cross them?
Awesome Design! How did you make the pvc truss? can you post up a pic of it
I found out how they made them
https://churchstagedesignideas.com/2011/12/01/the-antitruss/
I used a chop saw cut them on a 45 degree angle and drilled a small drill bit and put a screw through it.